Download User Manual - Livewire Connections Ltd

2406-49 Technical Specifications
8.
2406-49 Broadband At Sea
2406-49 Technical Specifications
The specifications of your 4006 antenna system are below.
8.1.Antenna Reflector/Feed 2406
Type
Size
Feed
LNB (s)
Polarization
Polarization control
Antenna Gain
TX Gain
RX Gain
Transmit frequency range
Receive frequency range
Spun Aluminum axis symmetric reflector
24 inch (61.0cm)
Center focus Cassegrain feed with Cross-Pol OMT
Single output Linear LNBs can be provided; for 10.95-11.7
GHz, 11.7-12.2 GHz or 12.2-12.75 GHz frequency bands.
Linear w/motorized skew adjustment
24 volt DC motor with pot feedback
36 dBi at 14.0 GHz Typical – in the Radome
34 dBi at 10.75 GHz Typical – in the Radome
14.0-14.5 GHz Ku Band
10.95-12.75 GHz Ku Band
8.2.RF Equipment
25W SSPBUC (Block Up-Converter)
Power Supply
Transmit Frequency
IF Frequency
Ku PLL LNB Input Frequency
8W SSPBUC (Block Up-Converter)
Power Supply
Transmit Frequency
IF Frequency
Ku PLL LNB Input Frequency
Wavestream, Ku-Band, 25 Watt
Wavestream, ICD-00-XSA-0002, Matchbox 48Vdc
14.0-14.5 GHz (Standard)
13.75-14.5 GHz (Extended Band Option)
950-1450 MHz (Standard)
950-1700 MHz (Extended Band Option)
11.70-12.20 GHz
Wavestream, Ku-Band, 8 Watt
Wavestream, ICD-00-XSA-0002, Matchbox 48Vdc
14.0-14.5 GHz (Standard)
13.75-14.5 GHz (Extended Band Option)
950-1450 MHz (Standard)
950-1700 MHz (Extended Band Option)
11.70-12.20 GHz
8.3.Pedestal Control Unit
The PCU Assembly contains 2 Printed Circuit Boards (PCBs). One is the main control board and the other is
the Motor Driver for the 3 Brushless DC Drive motors (AZ/EL/CL).
Connectors
Antenna Pedestal
44 Pin D-Sub connector
Motor Interface
25 Pin D-Sub connector
M&C Interface
15 Pin D-Sub connector
GPS Input
BNC connector
Controls
None
8-1