Download McDATA EFCM Basic User Manual
Transcript
Glossary subnet mask switch A mask used by a computer to determine whether another computer with which it needs to communicate is located on a local or remote network. The network mask depends upon the class of networks to which the computer is connecting. The mask indicates which digits to look at in a longer network address and allows the router to avoid handling the entire address. Subnet masking allows routers to move the packets more quickly. Typically, a subnet may represent all the machines at one geographic location, in one building, or on the same local area network. A device that connects, filters and forwards packets between local area network (LAN) segments or storage area network (SAN) nodes or devices. switch binding A feature that restricts the product from allowing connections with the devices that are not listed on the Switch Binding Membership List. Switch Binding is available only if the SANtegrity Binding feature is installed. switch binding membership list SBML. If switch binding is enabled, a list of devices with which the product is allowed to make connections. switched mode If the arbitrated loop device is in switched mode, each pair of communicating ports on the arbitrated loop device can share the 100 Mb bandwidth. In switched mode, up to three pairs of loop devices can communicate with each other simultaneously. Or, a public device on the loop can communicate with another device on the fabric while up to two pairs of loop devices can communicate simultaneously. switchover Changing a backup field-replaceable unit (FRU) to the active state, and the active FRU to the backup state. switch priority Value configured into each switch in a fabric that determines its relative likelihood of becoming the fabric’s principal switch. Lower values indicate higher likelihood of becoming the principal switch. A value of 1 indicates the highest priority; 225 is the lowest priority. A value of 225 indicates that the switch is not capable of acting as the principal switch. The value 0 is illegal. system name See product name. g-39