Download DCON_DLL - kolbinger electronic

„ AnalogInFsr
Description:
Obtain the analog input value in “FSR” format from I-7000 series modules. The
“FSR” means “Percent” format.
Syntax:
AnalogInFsr (WORD wBuf [], float fBuf [], char szSend [], char szReceive [])
Input Parameter:
wBuf:
fBuf:
szSend:
szReceive:
WORD Input/Output argument table
Float Input/Output argument table
Command string to be sent to I-7000 series modules
Result string receiving from I-7000 series modules.
Return Value:
NoError:
Others:
OK
Error code
wBuf: WORD Input/Output Table
wBuf[0] :
wBuf[1] :
wBuf[2] :
wBuf[3] :
wBuf[4] :
wBuf[5] :
wBuf[6] :
COM port number, 1 to 255
Module address, from 0x00 to 0xFF
Module ID, 0x7011/7012/7013/7014/7017/7018/7033
0=checksum disable, 1=checksum enable
Time out setting, normal=100, unit=ms.
Channel number for 7017/7018/7033
0 Æ no save to szSend & szReceive
1 Æ save to szSend & szReceive
fBuf: Float Input/Output Table
fBuf[0]:
The analog input value.
Note : Users have to use DCON utility to set up the analog input configuration
of the module in FSR format.
DCON DLL user’s Manual, 2003 June, Ver. 3.5, 7MS-018-35------ 34 -