Download 4.6-E1

ARIB TR-B15
Version 4.6-E1
5.15.3 Reset button
A receiver should be equipped with a reset button to be prepared for a failure where a receiver becomes
inoperable. The reset button should be able to recover the receiver from the inoperable status.
5.15.4 RGB analog terminal
•
Manufacturers can decide whether to equip a VGA terminal to a receiver. If it needs to be equipped with
a VGA terminal, the terminal connector must fulfill the requirements described in "4. Physical
Connections" in "Enhanced Display Data Channel Standard (Version 1)" issued by VESA. The output
signal format must fulfill the requirements described in "2. VESA Video Signal Definition" in "Video
Signal Standard (Version 1, Rev. 1)" issued by VESA.
•
Manufacturers can decide whether to equip a DVI terminal that outputs analog signals. If a receiver
needs to be equipped with a DVI terminal, the terminal connector should fulfill the requirements
specified in "5. Physical Interconnect Specification" in "Digital Visual Interface DVI (Revision 1.0)"
issued by DDWG. The output signal format should fulfill the requirements specified in 2.5 Analog of "2.
Architectural Requirements" in "Digital Visual Interface DVI (Revision 1.0)".
•
For information on the operation of RGB analog outputs, see Section 8 of Part 1 of this document.
5.15.5 Digital video terminal
•
Manufacturers can decide whether to equip a DVI terminal to a receiver. If a receiver needs to be
equipped with a DVI terminal, the terminal connector should fulfill the requirements specified in "5.
Physical Interconnect Specification" in "Digital Visual Interface DVI (Revision 1.0)" issued by DDWG.
The output signal format should fulfill the requirements specified in "2. Architectural Requirements" in
"Digital Visual Interface DVI (Revision 1.0)".
•
For information on copyright protection technologies, see "5.10.4 Digital Video Output" in this section
and Section 8 of Part 1 of this document.
5.15.6 Digital video and audio terminal
•
Manufacturers can decide whether to equip an HDMI terminal to a receiver. If a receiver needs to be
equipped with an HDMI terminal, the terminal must fulfill the requirements specified in
"High-Definition Multimedia Interface Specification" issued by "HDMI Licensing, LLC".
•
For information on copyright protection technologies, see "5.10.5 Digital Video and Audio Output" in
this section and Section 8 of Part 1 of this document.
5.15.7 Modem
See “ARIB STD-B21 Chapter 11 Specifications of bidirectional communication function”. A PSTN
compatible modem (V.22bis or more, MNP4 or more) is required when it is to be equipped.
―2-34―