Download User Manual

GVS K-BUS○R KNX/EIB
Temperature Control Panel
Once setting the "internal and external sensor", if the thermostat panel does not receive the temperature
send by external temperature sensor within the set monitoring time, temperature control panel will
consider the external sensor is faulty , so that only use the measurement by temperature control panel to
control .
The monitoring time will be re-timed, when the thermostat panel receives each packet send from the
external temperature sensor,
Note: The monitoring time from temperature control panel for external temperature sensor should be at
least 2 times for the time that the external temperature sensor sending messages for preventing packets
missing.
Parameters "Period of sending temperature"
Options: Do not send
5s
10s
..
2h
This parameter sets the time
temperature".
interval of sensor for sending temperature to the bus loop through "Actual
Parameters "Indoor and outdoor temperature"
Options: disable
enable
The parameter is visible when the "Temperature sensor"
selecting "internal sensor and external
sensor", which can be used to set whether to alternately display the indoor temperature and outdoor
temperature on the display. Outdoor temperature taken from the object 84.
Parameters "Indoor and outdoor temperature switch time (second)"
Options: 0 ... 255 s
The parameter will be visible when the parameter "Indoor and outdoor temperature" selecting
"enable" ,which is used to set the time interval for the internal temperature and external temperature
alternately.
21
www.video-star.com.cn
[email protected]
Tel.：（8620）39338986
Fax.：（8620）39338465