Download Table Of Contents

Define Exclusion Regions Window's Buttons and Check Boxes
The Define Exclusion Regions window features the following buttons:
Button, Check
Box
Description
Set All
Lets you quickly select all grid sections in the preview image.
This may be advantageous if you want to disable motion detection in most areas of
the image, in which case you can simply clear the few sections in which you do not
want to disable motion detection.
Clear All
Lets you quickly clear all grid sections in the preview image.
Auto
By clicking the Auto button you can make OnSSI NetDVMS automatically detect areas
with noise (insignificant changes in individual pixels which should not be regarded as
motion) in the image, and automatically mark such areas as areas in which motion
detection should be disabled.
As the automatic detection is based on an analysis of a number of images, it may take
a few seconds from you click the Auto button to noisy areas are detected and marked
as areas in which motion detection should be disabled.
Note: The automatic detection of noisy areas happens according to the noise
sensitivity setting specified in the Adjust Motion Detection window. In order for the
automatic detection of noisy areas to work as intended, it is recommended that you
specify a noise sensitivity setting that matches your requirements before you make
use of the automatic detection feature.
Show Grid
With the Show grid check box selected (default), the preview image contains a grid
indicating the division of the preview image into selectable sections.
With the Show grid check box cleared, the grid in the preview image is removed. This
may provide a less obscured view of the preview image. Selection of areas in which
motion detection should be disabled takes place the same way as when the grid is
visible.
Note: Access to features in the Administrator application, including those described in the following,
may require administrator rights.
The Select Color window lets you select between three colors to be used for highlighting areas with disabled
motion detection when images from the a camera are viewed in the Monitor application.
Highlighting of areas with disabled motion detection in the Monitor application requires that the Show
Regions check box in the Camera Monitor section of the Camera Settings for [Device Name] [Camera
Name] window is selected.
You access the Adjust Motion Detection window the following way: Select the required camera in the
Administrator window's Device Manager section, then click the Settings... button to open the Camera
Settings for [Device Name] [Camera Name] window. In the Camera Settings for [Device Name] [Camera
Name] window, click the Region Color... button.
Note: Access to features in the Administrator application, including those described in the following,
may require administrator rights.
In the Output Settings for [Device Name] [Camera Name] window you are able to associate a camera with
particular external outputs, defined in the I/O Setup window, for example the sounding of a siren or the
switching on of lights.
The associated outputs can be triggered automatically when motion is detected as well as manually through
output buttons available when the camera is selected in the Monitor application, NetGuard remote client
and NetGuard EVS.
On-Net Surveillance Systems Inc.
www.OnSSI.com
Page 26