Download TSP Edge User`s Manual

TSP Edge User’s Manual
8 Channel POTS FXO Card Type
When the 8 Channel POTS FXO card type is chosen, only a Channels tab is
displayed. See Figure 19. These channels operate as Analog Loop Start FXO only.
Figure 19. POTS FXO Card Type
Channels Tab
The Channels tab is where each channel can be assigned a Phone Number, Transmit
Digits (T1/E1 only) and Audio Message. The Channel Configuration field assigns the
channel an identification number (see “Channel Identification” on page 30).
The Subaddress, Calling Number, and Called Number fields are only available for
T1-PRI and E1-PRI card modes. For more information, see “Primary Rate ISDN
Software Modules (TSP-PRI and TSP-2PRI)” on page 87.
Note: For E1, only usable channels are listed (1-30). The 2 signaling channels
are not available.
40-400-00065, Rev. E
29