Transcript
DIGIWALL DIGITAL NON WOVEN WALLCOVERINGS DIGITAL WALLCOVERING REQUIREMENTS An own design, printed on quality coated wallcoverings PREPARATION OF THE WALLS can give an interior a highly personal and unique touch! - The wall must be smooth, flat and dust free. The possibilities of digital printing are practically endless. - A primer or fixative is recommended. This will reduce possible colour Every desired picture, drawing or image can be created variations or stains. into a room-wide wallcovering. Khlara offers you the possibility to develop a wallpaper of your own design, of WALLCOVERING INSTRUCTIONS a width of 106 cm per panel. Contact your supplier for - Use a ready-made universal water-based wall adhesive (suitable for non more details about supply and delivery specifications.* woven wallcoverings). Apply this evenly on the wall with a paint roller. - Apply the wallcovering to the wall and press it on gently. Please use a soft- * The examples on this page can be ordered. For more information, contact your supplier. haired, clean wallpaper brush. MAIN CONSIDERATIONS - Do not apply a thick layer of adhesive to the wall. - Do not apply adhesive to the wallcovering itself. - Ensure that no water touches the printed side, because this can cause possible ink runs. - Digital wallcovering is not washable. WIDTH 1.06m / panel - Please consider the opening time and processing time of the adhesive product. Please read the user manual carefully. LENGTH max. 10 meters - Provide adequate ventilation, humidity and moderate temperatures (15 to 20 degrees is ideal). - It is not recommended to use a palette or spatula for pressing down. WEIGHT +- 130 - 150 g/m² or 3,8 – 4,5 oz/yd² DIGITAL PR INTING examples PICTURE 1 PANEL 1.1 PICTURE 2 PANEL 1.2 CONTACT / [email protected] PANEL 2.1 PANEL 2.2 PANEL 2.3 WWW.KHLARA.COM
