1
Download PDF User Manual
Transcript
150 | P a g e Chapter 10 - Evidence Module Figure 121, Adjust time zone information when adding evidence 10.6 ADDING ADDITIONAL EVIDENCE TO A CASE Once added, a device, image, or registry file will appear in the “Evidence” field of the Evidence module, as shown in Figure 122 below: Figure 122, Evidence module, Evidence list To add an additional device, image or file: 1. Click on the case name (e.g. “Case: Test Case 3” above) to activate the add buttons; 2. Repeat the process described above. Copyright GetData Forensics Pty Ltd 2010 - 2015, All rights reserved.
