Download SIMATIC Text Display (TD)

Preface
Purpose of the manual
The SIMATIC Text Display (TD) User Manual is a combination user and reference manual that
describes the operation of the TD devices (TD 200 and TD 200C) with an S7-200 CPU.
Required Basic Knowledge
This manual is designed for engineers, programmers, and maintenance personnel who have a
general knowledge of programmable logic controllers and operator interfaces.
Scope of This Manual
This manual describes the installation, configuration and operation of both the TD 200 version 3.0
and the TD 200C version 1.0. This manual also describes the TD 200 wizard of
STEP 7--Micro/WIN (used to configure the S7-200 CPU for either TD device) and the Keypad
Designer application (used to configure the keypad of the TD 200C).
To utilize the new features of these TD devices, you must use STEP 7--Micro/WIN version 4.0 or
greater.
Agency Approvals
These SIMATIC TD devices meet the standards and regulations of the following agencies.
-
Underwriters Laboratories, Inc.(UL): UL 60950
-
Canadian Standards Association: CSA C22.2 No. 60950 standard
Refer to Appendix A for additional compliance information.
Certification
These SIMATIC TD devices have the following certification:
-
Underwriters Laboratories (UL) Standards UL 60950 and CSA C22.2 No. 60950
-
Factory Mutual Research: Standard Class Number 3611, Class I, Division 2, Group A, B, C,
D, and Class I, Zone 2, Group IIC.
Temperature class T5 is adhered to when the ambient temperature during operation does
not exceed 60°C.
CE Labeling
These SIMATIC TD devices fulfill the requirements and protection guidelines of the following EU
directives:
-
EC Directive 73/23/EEC “Low--voltage directive”
-
EC Directive 89/336/EEC “EMC directive”
C-- Tick
These TD devices are compliant with requirements of the AS/NZS 3548 (Australian) standard.
Recycling and Disposal
Please contact a company certified in the disposal of electronic scrap for environmentally safe
recycling and disposal of your device.
iii