Download CNC 8055MC

8055MC CNC
4.
4.4
Work with operations or cycles
Surface milling operation
Surface dimensions (L, H, E)
They are defined one by one. Place the cursor in the corresponding window, key in the desired
value and press
When programming parameter «E» with a smaller value than the tool radius, the CNC executes
the planning with an «E» value equal to the tool radius.
Machining conditions in Z (Zs, Z, P, I, Fz)
The machining conditions are defined one by one.
The Zs and Z values are defined like the starting and end points.
To define the rest of the values (P, I, Fz), place the cursor in the corresponding window, key in
the desired value and press
Milling step (∆) and finishing stock (δz)
They are defined one by one. Place the cursor in the corresponding window, key in the desired
value and press
Chapter 4 - page 9