Download User Manual (Version: 5.0.0) -

Protocol Type:
Select to use standard FTP connection or SSL/TLS encrypted FTP. Select the correct
protocol type in your client FTP software to ensure successful connection.
Unicode Support:
Turn on or off the Unicode support. The default setting is No. If your FTP client does
not support Unicode, you are recommended to turn off this option and select the
language you specify in “General Settings” > “Codepage” so that the file and folder
names can be correctly shown. If your FTP client supports Unicode, enable Unicode
support for both your client and the NVR.
Anonymous Login:
You can turn on this option to allow anonymous access to the NVR by FTP. The users
can connect to the files and folders which are open for public access. If this option is
turned off, the users must enter an authorized username and password to connect to
the server.
Advanced
Passive FTP Port Range:
You can use the default port range (55536-56559) or specify a port range larger than
1023. When using this function, make sure you have opened the ports on your router
or firewall.
Respond with external IP address for passive FTP connection request:
When passive FTP connection is in use, the FTP server (NVR) is behind a router, and a
remote computer cannot connect to the FTP server over the WAN, enable this
261