Download FlexChassis ATCA-SH61

2x
EEPROM's
Figure 17 - Shelf ID Board with two E²PROMs (rear cover removed)
2.1.11 Holder for Cable Management (Optional)
A cable holder frame can be fitted to both side mounting flanges of the shelf.
Please note that since there are fan trays on both sides of the shelf, it might be difficult to replace a fan tray due to
cabling that are bring routed from the sides. Take it into account while you route the wires and cables to and from
the shelf.
2.1.12 Shelf Manager Board
The shelf manager controls and manages the chassis. It controls the fans speed, monitors temperatures across
the chassis, manages the hot swap insertion and extraction of modules and blades and performs multiple other
tasks and functionalities. For more information, please refer to the separate Shelf Management Board user
manual.
Document CC09456-01
FlexChassis ATCA-SH61
User Manual