Download Shallow Borehole EpiSensor

DOCUMENT 301934, REVISION B
2. Installation
This chapter contains information relevant to the installation of the SBEPI unit.
Our Services Group can provide additional expertise and borehole services.
This chapter covers the following information:
„ Accessory Kit
„ Electrical Connection
„ Functional check and zero offset measurement
„ Accelerometer adjustment
„ SBEPI installation
Accessory Kit
The SBEPI is shipped with the following accessories. These items are required
for installation of the unit. Please contact Kinemetrics for replacement kits.
Table 1: Accessories
Kinemetrics P/N
Quan.
Item
Purpose
110393
1
Allen wrench
Tool for adjusting the zero offset
700281-142
2
O-ring
Seals the sensor to the main housing
870513
2
Backup Ring
Seals the sensor to the main housing
110582
1
Spanner wrench
Tool for opening unit
700403
2
Desiccant
Maintain Humidity Free Interior
Inspecting the Cable End
Before lowering the instrument into its hole, inspect the unit and the cable end,
make sure the cable insulation is not damaged Test the unit by making the
electrical connections as follows:
SHALLOW BOREHOLE EPI USER GUIDE
5