1
Download GMS User Manual (v8.3)
Transcript
Cross Sections 52 Solid Cross Sections Solid cross sections can be created by "slicing" through a set of solids using the Create Cross Section tool. This can be done at any angle and the slicing can be done using a multi-segment polyline. Solid cross sections can be converted to a conceptual model. This is useful if you have a solid model of an embankment that you want to analyze using UTEXAS. Example of fence diagrams created using solids Borehole Cross Sections Borehole cross sections are quite different than solid, 3D grid, and 3D mesh cross sections. See the page on Borehole Cross Sections. Borehole cross section
