Download User Manual

GL-VP-62x0 User Manual
RTP and the port_value+1 for its RTCP; channel 1 will use
port_value+2 for
RTP, port_value+3 for its RTCP and so on.
The default value for Profile 1 is 5004 and 6004 for Profile
2.
This parameter, when set to “YES”, will force random
generation of both the local SIP and RTP ports. This is
usually necessary when multiple GL-VP-62x0 are behind
the same NAT.
Use Random Port
Default is No. If set to Yes, then for Attended Transfer, the
Refer-To Use Target
“Refer-To” header uses the transferred target‟s Contact
Contact
header information.
DTMF Payload Type
DTMF in Audio
Setting Options
DTMF via RFC2833
DTMF via SIP INFO
Sets the payload type for DTMF using RFC2833.
Send DTMF as inband (in-audio).
PROFILE PAGE DEFINITIONS
Meaning
Default “YES”.
Send DTMF via SIP INFO message.
Send Flash Event
Default is No. If set to yes, flash will be sent as DTMF
event.
Proxy-Require
SIP Extension to notify SIP server that the unit is behind
the NAT/Firewall.
Copyright © 2009-2011 GigaLink
Page 21 of 29