Download Dual Channel User Manual

Advanced Configuration
 Any other digits will go by default to 9300.
 To activate the IVR message:
1) On the Main Toolbar, click Ports.
2) Select the IVR tab.
3) In IVR General Settings section, define the following:
a. Active - select Active to enable IVR message recording
b. Type - select either:
 Quick Call - hear the IVR message only
 Choose Call - hear the IVR message and choose the extension with DTMF from the list.
a. Default Number - The default extension number when the requested extension does not exist.
b. Record Number - The number to dial to record the IVR message.
c. Test Number - The number to dial to hear the IVR message.
1) In IVR Values, list the digits to be dialed to reach the IVR extensions.
 Seq - the digits to dial
 Dest - the extension number
2) Click Save.
3) Select a port from the port list.
VoIP²ALL 2 Channel Gateway User Guide
www.eurotech-communication.com
58