Download CC 3816 - Bouyer

5
INSTALLATION
The unit comes complete with everything needed to get it mounted it into a 19” rack. Only
four M6 screws are needed to set the unit in place.
Warning
The CC 3816 must not be exposed to water (through splashing, from
condensation, etc.).
Ensure the front and rear ventilation grills are kept clear at all times and
that air flow around the unit is not restricted. Ensure there is sufficient
room at the rear of the unit (at least 100 mm) to connect the cables.
5.1 Block diagram of the CC 3816 audio channels
5.1.1 Mic/Line audio inputs (1 to 4)
DSP
Vu-mètre/
Vumeter
Entrée audio/
Audio input
Pré-ampli Mic / Ligne
Mic/Line preamp
Détec.
Niveau/
Level
detection
Noise
Gate
Tonalité
Tone
Volume
Canal DSP/
DSP channel
Mute
5.1.2 Line audio inputs (5 to 8)
DSP
Vu-mètre/Vumeter
Entrée audio/
Audio input
Transformateur
Transformer
Pré-ampli Ligne
Line preamp
Détec.
Niveau
Level
detection
Noise
gate
Tonalité
Tone
Volume
Mute
Canal DSP/
DSP channel
5.1.3 Audio outputs (1 to 16)
DSP
Vu-mètre/
Vumeter
Canal DSP/
DSP channel
8
Routage/
Routing
Egaliseur/
Equaliser
Volume
Jour/Nuit
Day/Night
Mute
Preampli de sortie/
Output preamp
Sortie audio/
Audio output
CC3816