Download Kaleido-X User`s Manual

Transcript
9 Creating Layouts
Note: If the actual audio source assigned to this audio monitor is not of the same format configured here,
then the audio data will not be shown.
3. Choose an Audio level:
4. Choose a value from the Channels list to indicate which channel to display:
– If the Audio format is set to PCM, then the available choices are left, right and stereo.
– If the Audio format is set to Auto, Dolby E or Dolby VANC, then the available choices are left, right,
stereo, surround, left surround, right surround, LFE, center, left back surround, right back surround, left
extra and right extra.
5. Choose a Dolby program:
6. Specify a Friendly name.
206