Download User`s Manual

Document type:
User's Manual (MUT)
7.1.23
Title:
Mod. SY1527, universal multichannel power supply system
Revision date:
26/08/2002
Revision:
4
The SETUP Menu: Communications
From the Communications pop-up window it is possible to access to the settings of the
interfaces installed on the system.
In particular, these are:
•
RS232 settings,
•
TCP/IP settings,
• CAENET settings.
These menus are accessible only if the current session was started with an Administrator
profile login. User and Guest profiles are not allowed to change interface settings.
The settings available in the RS232 settings pop-up window are as follows:
•
Baude rate,
•
Parity,
•
Character Length,
•
Number of stop bits
• Flow control.
Default settings are listed in Table 6.1, p.37.
The settings available in the TCP/IP settings pop-up window are as follows:
•
IP address,
•
IP Net Mask,
• Gateway.
Default settings are listed in Table 6.2, p. 38.
The setting available in the CAENET settings pop-up window is:
•
Crate Number.
The crate number is the identification number assigned to the crate when belonging to a
daisy-chain.
Default settings are listed in Table 6.4, p.40.
7.1.24
The SETUP Menu: Security
This feature will be implemented in the Software Version 2.00 or later.
7.1.25
The SETUP Menu: Log Options
This feature will be implemented in the Software Version 2.00 or later.
NPO:
00103/97:1527y.MUTx/04
Filename:
SY1527USERMANUAL_REV4.DOC
Number of pages:
86
Page:
69