Download Supervisor X user manual

1 Introduction and software installation
1.1 Contents of the manual
This manual contains detailed information about installation, configuration and use of the
reception software Supervisor X to carry out the supervision and remote video management of
any building or business establishment that they have installed VX/VS, NVX and Axis cameras.
1.1.1 Version Compatibility
The reception software Supervisor X version 6.5 is compatible with:

VX 4.0 units onward.

Previous versions of VX and VS units with limited functionality.

Supervisor X it is also compatible with Axis cameras with the following features: Axis
camera application platform (ACAP, processor Artpec 3 or Artpec 4 and H.264 support).

NVX units.
1.2 Software and hardware minimum requirements
Supervisor X application can be installed on a PC or laptop having the following prerequisites:

Windows 8 operative system.

Windows 7 operative system.

Windows Vista operative system.
Note: Supervisor X in sever-client mode is not compatible with Windows Vista Home.

Windows XP operative system with Windows XP Service Pack 2.

.NETFramework V 4.0
In case of not having the .NET framework installed the Supervisor X will show a warning
message and an Internet address to obtain it. Once the software pre-requisites are checked,
the PC or laptop must have the following minimum configuration:

XGA graphic board 1024x768.

Mouse, keyboard and colour monitor.

4 GB minimum memory, 50 MB Free space for application files and 2 GB for the data
base.

Ethernet LAN board (TCP/IP)
1.3 Installation process
Attention: The application must be installed from an operative system administrator user, being
able to be used later from other users.
The complete installation of Supervisor X software involves the following steps:
Insert the Supervisor X CD or download it from the web (www.visual-tools.com). Select the
executable file setup.exe to start the automatic installation process.
It will appear a warning message to restart the unit when the installations ends, only for units
installations with Windows Vista.
User manual - 3