Download BTM510/511 Multimedia Module User Guide

Transcript
BTM510/511 User Guide
®
Bluetooth Multimedia Module
HFG”CCWA1”
Request to activate call waiting notification in the AG.
HFG”CMEE1”
Request to activate extended AG error result codes in the form +CME ERROR: <err>.
HFGRX”<data>”
Spy message displaying incoming data on SLC (rfcomm) of the HFP link
HFGUC”<data>”
Message displaying unrecognized command data from SLC (rfcomm) of the HFP link.
NO CARRIER 111F
Service level connection to local HFG-instance has been released. See UUIDs in CONNECT/NO CARRIER
Messages as well.
2.6.8.2.27 AG - HFP summary (HFG)
Table 2-61: AG-HFP (HFG) – Summary of S Registers and AT Commands
Task
AT-Command/S Register
Comment
Enable HFP-AG role
S102
0x40 = AG role of HFP (bitmask),
needs subsequent AT&W and ATZ to
activate
Initiate SLC from HFG
AT+HFGD<bd_addrhex>
Responses:
Successful:CONNECT
123456789012,111F,>
failed: “NO CARRIER”
profile disabled: ERROR 59
incorrect state: ERROR 63
Initiate audio
connection from
AG/Transfer Audio
from AG to HF
AT+HFGA
Response:
HFG”AU1”
ERROR 63 is returned if this command is
used during call setup
(incoming/dialling/alerting).
Release audio only from
AG / Transfer Audio
from HF to AG
AT+HFGR
Response:
HFG”AU0”
ERROR 63 is returned if this command is
used during call setup
(incoming/dialling/alerting).
Disconnect SLC from
HFG (and audio if
exists)
AT+HFGH / ATH111F / ATH*
See sections Disconnecting Profiles and
UUIDs in CONNECT/NO CARRIER
Messages.
ERROR 63 is returned if this command is
used during call setup
(incoming/dialling/alerting).
Embedded Wireless Solutions Support
Center: http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
Laird
143
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610