Download IntelliAg - DICKEY

Anhydrous Control
Continental/TTU
Features:
•
Allows faster runs at lower tank pressures
•
Attain flow rates up to 9,600 lb./hr.
•
Standard 1 1/4 in. plumbing
•
Compatible with N-Serve nitrogen stabilizer
•
Interchangeable orificed hose barbs for constant 2% or
less vapor bleed off
To determine exchanger kit and valve size use the following
formula:
Applicator width X speed X application rate (gpa) X 0.1212
Example:
42.5 ft. X 6 mph X 200 lbs. NH3 X 0.1212 = 6,181 lbs./hr.
NH3 Kit Anhydrous Ammonia Flow Rate Chart
Heat Exchanger Kit
Maximum Flow Rate
Valve Size
Single TTU
4,200 lbs./hr.
3/4 in.
Single TTU
5,500 lbs./hr.
Continental Superflow
1 in.
Continental Superflow
9,600 lbs./hr.
1 1/4 in.
Selecting a NH3 Heat Exchanger Kit requires:
•
Width in feet of the anhydrous tool bar
•
Maximum ground speed (mph) the tractor will pull the tool
bar
•
Maximum application rate of NH3 per acre to be applied
To ensure the highest possible flow rates, applicator plumbing
must be sized properly.
LBS/HR
Plumbing Size
0-3600
1 in. feed line and breakaway
3600-6800
1 1/4 in. feed line and breakaway
6800-up
1 1/2 in. feed line and breakaway
Anhydrous Kits
Single Thermal Transfer Unit
108
Part
Number
Description
CCSNH3KIT
NH3 Kit TTU with 467095300 3/4 in. Valve & Actuator (4200
lbs/hr)
CCSNH3KIT1
NH3 Kit TTU with 467095040 1 in. Valve & Actuator (5500 lbs/hr)
CONTNH3KIT
NH3 Kit Continental with 457903380 1 1/4 in. Ball Valve and
467095060 Actuator (9600 lbs/hr)
46709-5300
Valve and Actuator 3/4 in.
46709-5040
Valve and Actuator 1 in.
46709-5060
Actuator 1 1/4 in.
46709-6040
NH3 Section Shutoff Control Valve
45790-4000
Hardware Kit Mounting Bracket and Coupler
45790-1610S1
Liquid Flow Meter (Paddle Wheel)
11071-0413A-201209