Download manual

Name
Description
Location
The chassis number in the stack, and the slot or converter number in the
chassis.
Name
The user-assigned or default name of the converter.
Oper Status
Operational status of the media converter, either Enabled (active) or Disabled
(inactive).
Ports
The number of ports on the converter.
Type
The type of media converter (e.g., an access line card, a single interface line
card, or a TDM T3 card).
LLCF/CLCF
When LLCF is enabled, if one port loses its link, the converter will not transmit
a link pulse from the other port.
CLCF is only applicable to the 1000Mbps TX-FX line cards. When CLCF is
enabled, the fiber port’s transmitter shuts down if the copper port stops
receiving link pulses.
Displaying Converter Information
Another way to view converter information is to open the Converter Configuration dialog
box using one of the following methods:
•
From the Module Configuration dialog box shown above, double-click the row
containing the converter.
•
Double-click the module in the chassis view.
•
Right-click the module in the chassis view and select Converter Configuration from
the pop-up menu.
The Converter Configuration dialog box displays the current information relating to the
converter you selected. The information displayed in the top half of the dialog box relates to
the converter.
The bottom half of the dialog box displays detailed information about each of the ports on
the converter. Refer to Displaying Port Details for descriptions of the Port fields shown.
Assigning a Converter Name
1. Open the Converter Configuration dialog box using one of methods described in
Displaying Converter Information.
2. In the Name text box, type the name you want to assign to the converter.
NetBeacon Management Software ~ Installation and User's Guide
81