Download User Guide - XBLUE Networks

Programming Steps
Step 1 – Press the programming button
Step 2 – Select phone setup
Step 3 – Press the select (center) navigation key
Step 4 – Press the down navigation key and select “Feature Key”
Step 5 – Press the center navigation button to begin
Step 6 – Press the up or down navigation key to select the feature
button to be programmed or press the feature key to be programmed.
AUTO
MUTE
Select FTR
Key
Programming
The display will show the selected FTR button. The display below shows
FTR#01, FTR button 1, was pressed.
AUTO
MUTE
FTR#01:DSS/BLF
=301
Step 7 – Press the Program button to exit programming, and not modify
the current button programming or press the center button to change
the current setting.
AUTO
FTR#01MUTE
=DSS/BLF Key
Step 8 – Using the up or down navigation keys, select between DSS/BLF,
Speed Key, or Feature.
Step 9 – Press the select button to display the current programmed
function.
Step 10 – Enter the appropriate extension, speed dial number or use the
up or down navigation keys and select the desired feature.
Step 11 – Press the select button to confirm the selection.
Issue 2
- 27
-