1
Download Accurax G5 with EtherCAT communication Users
Transcript
3-4 Cable and Connector Specifications Connector-Terminal Block Conversion Unit (XW2B-20G@) The Unit is used with a Connector Terminal Block Cable (XW2Z-@J-B34). They convert the control input signal (CN1) of the G5-series Servo Drive into a terminal block. Terminal Block Models Model Description XW2B-20G4 M3 screw terminal block XW2B-20G5 M3.5 screw terminal block XW2D-20G6 M3 screw terminal block XW2B-20G4 3 Dimensions Flat cable connector (MIL type plug) 67.5 15.5 20 19 1 19 2 45 29.5 2 1 3.5 Specifications 3.5 2-φ3.5 20 Terminal block (45.3) 38.1 20.5 5.08 Precautions for Correct Use Use 0.3 to 1.25 mm2 wire (AWG22 to 16). The wire inlet is 1.8 mm (height) × 2.5 mm (width). Strip the insulation from the end of the wire for 6 mm as shown below. 6 mm OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications) 3-82
