Download FreeWave Spread Spectrum Wireless Data Transceiver User Manual

FreeWave Technologies
Spread Spectrum Transceiver User Manual
900 MHz and 2.4 GHz
V4.2f
Note: The Subnet ID settings are irrelevant for the Master.
Note: The Master always transmits on Subnet ID=0, regardless of the setting.
To force communications directly through the Master the Slave or
Repeater's Rcv SubnetID must be set to 0.
Note: The Subnet ID works only in Multipoint Networks using NetworkID.
Note: In typical Multipoint Networks the Freq Key must be at the same setting for
all transceivers. If the SubnetID is used the sub network may be set to a
different Freq Key.
Note: If both Rcv SubnetID and Xmit SubnetID are set to 0 the SubnetID will
show Roaming in the menu. This feature has not been enabled at the
time of the printing of this manual.
15