Download User Manual - GEOSYSTEM Software

Transcript
QC-Concrete Reference Manual
Appendix C
Upgrading to Ver. 2 from Ver. 1
C.1
Installation
Updating from version 1 to version 2 is done using the master version 2 CD. To do so, follow these steps:
1.
Update to the most current release of version 1 of QC-Concrete.
To do so go to
WWW.GEOSYSTEMSOFTWARE.COM and click on the Program Updates / Concrete Break link.
Follow the directions there. Then run QC-Concrete at least once after updating to insure that the update
was successful, and any database changes have been incorporated.
2.
Make a backup copy of the entire QC-Concrete program folder and if the database is located elsewhere,
back it up as well. In the event of a failed update you will need the backup to be able to revert to the
previous version. For example, one way to do this is:
1) Double click on the "My Computer" Icon on the desktop.
2) Navigate to the QC-Concrete program folder by opening the folders in its path in sequence.
3) Right click on the QC-Concrete folder icon and select "Copy".
4) Navigate to C:.
5) Right click and select "New" then "New Folder".
6) Right click on the new folder (named "New Folder").
7) Click on "Paste".
8) If the database is not in the program folder, follow a similar procedure to back it up as well.
If you are unsure about these directions or how to copy a folder to make a backup, have your office
computer expert do it for you.
3.
Insert the new Version 2 CD in the computer where Version 1 is installed. If the setup program does not
autostart, navigate to and run SETUP on the CD. The simplest way to do this is starting at the Windows
Desktop, select Start, Run. Enter D:SETUP, select OK. D: is typical, if your CD-ROM drive is a
different letter, use it.
4.
Read the setup dialogs and do what they say. When you get to the Choose Destination Location
dialog, it will suggest C:\Program Files\GEOSYS. If that is not your GEOSYSTEM for Windows folder,
choose Browse, and navigate to the correct folder. If you do not have GEOSYSTEM for Windows
installed, any new folder you choose will work.
5.
When you get to the Select Program Manager Group dialog it will suggest GEOSYSTEM. This is
where your QC-Concrete shortcut will be in your Start Menu. Select another program group if you would
prefer.
6.
While it is installing, please take a moment to complete the License Agreement and return it or a copy of
it to us. If you completed a license agreement for version 1 you do not need to do so. If a license
agreement was enclosed with the Version 2 CD, then we probably do not have a license on file and would
appreciate it if you would send it.
7.
When you get to the Installation Complete dialog, click Finish and you are done installing. Unless you
are running Windows XP you should re-boot when suggested by the installer.
99