Download Section 1: Introduction

QUADRA Q4 Diamond Series II
4.2 Installation of the Disposable Lamp Unit
CAUTION
ALWAYS FOLLOW THE INSTRUCTIONS PROVIDED WITH THE REPLACEMENT DISPOSABLE HEAD.
The Disposable Lamp unit should be installed and removed using the following procedure.
Failure to follow the recommendations below may result in damage to the handpiece or
Disposable Lamp and / or harm to the client or user.
To remove the installed Disposable:
1. Ensure the Quadra Q4 Diamond Series II unit is switched on, in ‘STANDBY’ and in the Mode
screen. The green light on the rear of the Handset should be ON.
-
If the unit is armed, press ARM / STANDBY, wait for the red light on the rear of the handset
to turn off, and then press the Mode button.
TREATMENT TYPE: HAIR
THEN ENTER
Figure 9: Quadra Q4 Diamond Series II Mode/Program selection screens
Light
Red - continuous
Red - flashing
Green - continuous
Function
Handpiece charged (ready to fire)
Handpiece Charging or Discharging
Handset ready to Open
Figure 10: Quadra Q4 Diamond Series II Handset LED sequence
Page 16
Open
x
x
√