Download Gould 5841\11 Programmable Controller

PREFACE
The purpose of this document is to instruct the user in the installation and
planning of a Modicon 584M Programmable Controller. The Introduction is
in Section 1. Section 2 describes the components of a 584 PC system. The
system configuration is described in Section 3. Section 4 details the
installation of the 584M PC, l/O modules, and remote l/O.
List of Related Documents:
PI-584M-002
584M Programming Guide
ML-PI 90-USE P190 Programmer User’s Manual
ML-584PUSE
584
PID User’s Manual
ML-584RUSE
584
Remote l/O User’s Manual
ML-584AUSE
584
ASCII Programming Guide
ML-584GUSE
584
Register Access Panel User’s Guide
The information in this document is subject to change without notice and
should not be construed as a commitment by Gould Inc., Programmable
Control Division. Gould Inc., assumes no responsibility for any errors that
may appear in this document. No part of this document may be reproduced
in any form without the express written permission of Gould Inc.,
Programmable Control Division. All rights reserved.
The following are trademarks of Gould Inc.:
Modicon
Micro 84
Modbus
Modvue
Modway
184
384
484
584
584M
584L
884
P180
P190
0 Copyright 1983, Gould Inc.
Printed in U.S.A.