1
Download Subsea Rail Mill User Manual
Transcript
Chapter 3, Set-Up and Operation: Hydraulic Connections Auto-plunge drive pressure Auto-plunge drive return Figure 3-14. Connect the auto-plunge drive hoses to the mill as shown. 2. Connect the cutting drive hoses from the TCU or hose reel to the fittings on the rail mill bulkhead as shown in Figure 3-15. Cutting drive pressure Cutting drive return Figure 3-15. Connect the cutting drive hoses to the mill as shown. E.H. Wachs Company Part No. 03-012-MAN, Rev. 1-0607 17
