Download PROCOM User Manual

20
Manual Tests
Line Decoder
A given number of current
measurements will be made each
time a decoder is tested. The time
interval will set the time between
each measure taken. The value of
the time interval is user definable and
can be set from 5 ms to 100 ms. The
default value is 20 ms. In our
example you may verify the standby,
inrush and holding to 34, 482 and 56
mA.
If you want to start with a specific
decoder, click on the button with the
question mark and select the one
from the drop down list. If you do
not select a specific one, the test
program will start with the first in the
installation. When the readings
appear you may stop the valve and
start the next.