Download NI-488.2M Function Reference Manual for Win32

Chapter 1
NI-488 Functions — IBCONFIG
Table 1-6. ibconfig Device Configuration Parameter Options (Continued)
Options (Constants)
Legal Values
IbcSAD
Changes the secondary address of the device. Identical
to ibsad.
Default determined by the GPIB Configuration utility.
IbcSPollTime
0 to 17 = Sets the length of time the driver waits for a serial poll
response byte when polling the given device. The length of
time represented by 0 to 17 corresponds to the ibtmo values.
Default: 11.
IbcTMO
Changes the device timeout period. Identical to ibtmo.
Default determined by the GPIB Configuration utility.
IbcUnAddr
zero = Do not send Untalk and Unlisten—UNT and
UNL—at the end of device-level reads and writes.
non-zero = Send UNT and UNL at the end of device-level
reads and writes.
Default: zero.
IbcWriteAdjust
0 = No byte swapping.
1 = Swap pairs of bytes during a write.
Default: zero.
© National Instruments Corporation
1-23
NI-488.2M Function Reference Manual for Win32