Download NI-488.2M Function Reference Manual for Win32
Transcript
Chapter 1 NI-488 Functions — IBPPC IBPPC Board Level/Device Level Purpose Parallel poll configure. Format C int ibppc (int ud, int v) Visual Basic CALL ibppc (ud%, v%) or status% = ilppc (ud%, v%) Input ud v Board or device descriptor Parallel poll enable/disable value Function Return The value of ibsta Output Description Device Level If ud is a device descriptor, ibppc enables or disables the device from responding to parallel polls. The device is addressed and sent the appropriate parallel poll message—Parallel Poll Enable (PPE) or Disable (PPD). Valid parallel poll messages are 96 to 126 (hex 60 to hex 7E) or zero to send PPD. Board Level If ud is a board descriptor, ibppc performs a local parallel poll configuration using the parallel poll configuration value v. Valid parallel poll messages are 96 to 126 (hex 60 to hex 7E) or zero to send PPD. If no error occurs during the call, then iberr contains the previous value of the local parallel poll configuration. For more information about parallel polling, refer to the GPIB User Manual for Win32. NI-488.2M Function Reference Manual for Win32 1-48 ni.com