Download KS32C6100

Transcript
KS32C6100 RISC MICROCONTROLLER
SYSTEM MANAGER
NON-BURST MODE
In non-burst mode, the external master is allowed one memory access operation with the requested access size
(byte, half-word or word) for each bus request.
Figure 4-21 shows the timing of an external master memory access in non-burst mode. In the example illustrated,
the physical memory data bus width is 16 bits (half-word size) and the external master requests a one-word
memory access size.
The timing sequence of the memory access in non-burst mode proceeds as follows:
1. The external master asserts ExtMREQ to request that the bus be held.
2. When the bus becomes available, the KS32C6100 stops driving XA0–XA23 and DA0–DA12, tri-states its data
ports (XD0–XD31), and asserts the acknowledge signal (ExtMACK) to grant bus mastership to the external
device.
3. The external master starts driving XA0–XA23 and DA0–DA12 to issue the required control signals to the
KS32C6100. These signals include ExtMA[27:0], ExtMBST (0), ExtMAS[1:0] (10), and ExtMRnW. (In a write
cycle, the external master also starts driving the memory data bus at this time.)
4. The external master then de-asserts the ExtMREQ signal and stops driving XA0–XA23 and DA0–DA12.
5. The KS32C6100 memory controller starts driving the memory control signals and DA0–DA12 for the low halfword data read/write operation, and asserts the first ExtMnDB[1:0].
6. The KS32C6100 de-asserts the first ExtMnDB[1:0] and then halts the low half-word data read/write control
signals. In a read cycle, the low half-word data fetch from D[15:0] is valid on the first set of ExtMnDB[1:0] rising
edges.
7. The KS32C6100 drives the memory control signals and DA0–DA12 for the high half-word data read/write
operation, and asserts the second ExtMnDB[1:0].
8. The KS32C6100 asserts the data latch signal (ExtMnDL) to indicate that the requested one-word operation to
be completed. It then de-asserts the second ExtMnDB[1:0] to halt the high half-word data read/write operation.
In a read cycle, the fetch of the high half-word from D[15:0] is valid on the second set of ExtMnDB[1:0] rising
edges.
9. After it de-asserts ExtMACK, the KS32C6100 de-asserts ExtMnDL to complete the entire external master
access memory cycle.
4-27