Download Flex Network User Manual - Pro

When using the Transistor output unit, (FN-XY08TS11/FN-XY08TS41/FNY16SC41/FN-Y16SK41/FN-XY16SK41/FN-XY16SC41), be sure to connect a
Reverse Start Power Absorbing Diode to both ends of the load.
FN-XY08TS41
When using the Transistor output unit, (FN-XY08TS11/FN-XY08TS41/FNY16SC41/FN-Y16SK41/FN-XY16SK41/FN-XY16SC41), be sure to connect a
Reverse Start Power Absorbing Diode to both ends of the load.
FN-XY08TS41
When attaching two (2) Transistor Ouput units (FN-XY08TS11/FN-XY08TS41/
FN-Y16SC41/FN-Y16SK41/FN-XY16SK41/FN-XY16SC41) with the same
Common line, be sure to use the wiring shown below.
FN-XY08TS41
FN-XY08TS41
DC Power
Push Lock Type
Emergency Swich
Do not use software to modify the Emergency Stop circuit. Instead,
create a hardware circuit like the "Failsafe" circuit shown above.
Flex Network User Manual
3-10