Download COMPACTplus-m - Leuze electronic

Warning!
The current path via the relay contacts of the AOPD must be compulsorily protected to
prevent the contacts welding in the event of an overcurrent. The fuse sizes depend on the
load. They are described in Table 12.1-7.
ENGLISH
Warning!
For higher switching voltages of up to 250 V AC, the load circuit must be separated from
the voltage supply and the status signals. In this case two cables must be routed through
the cable screw; the second lead-in opening has already been prepared and must now only
be pushed through.
DEUTSCH
Electrical connection
FRANÇAIS
a
a = Just push opening through when a separate connection cable for the load circuit is to be connected.
Cable screw M25x1.5, application prepared for connecting 2 cables
NEDERLANDS
ESPAÑOL
ITALIANO
TNT 35/7-24V
Fig. 7.6-1:
Leuze electronic
COMPACTplus-m
69