1
Download CHRONOPRINTER 540 User Manual
Transcript
15. Information about Timing Modes Each Timing Mode has parameters that are memorized (default) based on those given during the last timing session. Each Timing Mode proposes the main parameters memorized by default or used during the last timing session. Example: PTB SEQUENTIAL Mode CHRONOPRINTER 540 N°0003 V.A-08 DATE <DMY> HOURS <HMS> 04.12.07 14:07:34 MEMORY FREE 26500 ***************************** PTB SEQUENTIAL PRECISION 1/1000 SEC INPUT 1 LOCK TIME 1.00 S INPUT 2 LOCK TIME 0.10 S INPUT 3 LOCK TIME 0.10 S INPUT 4 LOCK TIME 0.10 S RS232 OUTPUT TO PC BAUDS RATE 9600 ***************************** ETHERNET OFF ***************************** ENTER THE MENU F PTB SEQUENTIAL • 4 active inputs with sequential numbering of time for each input NET TIME • Start on input 1 • Finish on input 4 • Inputs 2 and 3 are not using • Automatic numbering on Start and Finish. • Calculation mode with truncation • Start on input 1 • Intermediate and/or speed on Inputs 2 and 3 • Finish on input 4 • Automatic numbering on start and finish NET TIME + 2 INTER Intermediate times with manual numbering by default • TAG Heuer Timing Calculation mode with truncation Page 26 / 44
