Download JetMove 215-480 User Manual

JetMove 215-480
7.3 Resolver Connection
7.3
7.3.1
Resolver Connection
Specification
Specification of mating connector for X61 (ENCODER)
•
•
9-pole Sub-D-plug (mail)
Metallized housing
Specification of resolver cable
•
•
•
•
•
•
Cable size: 3 * 2 * 0.14 mm² + 2 * 0.5 mm² (AWG 26(3) + AWG 20(2))
2 * 0.5 mm² (AWG 20(2)) are for connection of the temperature sensor
Cores have to be shielded and twisted in pairs and must be included in an overall
shielding
Shielding has to be connected to the connector housings on both sides
Material: copper
Temperature class: 60 °C
Maximum cable length: 50 m
7.3.2
Resolver cable with mating connector
Note!
The resolver respectively HIPERFACE mating connector of the synchronous
servo motor series JL5 can be ordered from Jetter AG by supplying the following
particulars:
Article # 15100069
Resolver / HIPERFACE
The complete resolver cable connecting the servo amplifier series JetMove 2xx,
as well as the synchronous servo motor series JL and JK can be ordered from
Jetter AG by supplying the following cable confection number and specifications:
Cable confection # 23
for the servo amplifier series JetMove 2xx
Mating connector of the resolver (solder side)
Solder Side
8 9 1
7 12 10 2
6 11 3
5 4
Fig. 10: RC series mating connector of the resolver (internal thread M23)
Jetter AG
51