Download VIA-170 Operating Instructions
Transcript
conductor held in place by insulators and that is used to transmit high frequency television signals. BOX - a square or rectangular marker which may be sized and placed on a VIA-170 overlay, in any number or in combination with other markers. CALIBRATION - the process of determining the scalar magnitude of each row or column of pixels. An operator places an object of known size in the field of view and enters the object’s dimensions. The VIA-170 calculates the corresponding constants, or scale factors. CCIR - the specifications describing monochrome television electrical performance standards issued by the International Radio Consultative Committee, an international telecommunications standards-setting body of the United Nations. The CCIR standard is used throughout most of Europe and Africa (except France and parts of northern Africa). CHORD - a line segment which joins any two points of an area's perimeter. CIRCLE - a circle or elliptical marker. In the VIA-170, circles may be sized into perfect or oval shapes. Such markers may be placed in an overlay in any number and in combination with other markers. CIRCLE DISPLAY - the feature in the VIA-170 which allows users to display a graphic of a circle while users place points to define that circle. This display will change slightly as each point is added. Turning on the display can help users align the edges of the circle against the object in the field of view. Turning off the circle display may be preferred when users need an unobstructed view of the video image. CIRCUMFERENCE - the distance of a line bounding a circle or any approximately circular area. CLEAR - the action key which allows operators to clear the overlay of all markers at once. A single active marker will remain on screen. CONTROLLER - a device which controls the creation, positioning and storage of markers or measuring lines on a VIA-170 overlay, such as a keyboard, light pen or knob controller. COORDINATES - a set of numbers used to specify the location of a point on the video monitor. COUNT - to add up units or groups of units for a total. CROSS HAIRS - a symbol consisting of two perpendicular lines. In the VIA-170, there is a cross hairs pointer used in marking. In measuring, a cross hairs cursor is used to designate points of measurement. 128 - Appendices Boeckeler VIA-170