Download Scriptalk Station Pharmacy Application User Manual - En
Transcript
5 Overview 5.1 Initial Setup The Scriptalk Station PC GUI Software is a PC-based system that runs on Microsoft Windows operating system. This software enables an end-user to update the firmware and support files on a Scriptalk Station Target board and program the RFID Tags with the same board. The target supports either USB Interface (USB to Serial Adapter) or Serial Interface. This software communicates with the Scriptalk Station Target board using the UART communication port emulated using an USB-to-UART adapter installed on the PC or RS232 communication. Scriptalk target Host PC Scriptalk PC GUI Application USB Port/ Serial USB Port COM Port USB-toUART Adapter RFID Link RFID Tag Figure -1 ScriptalkM – PG GUI Setup 5.2 System Requirements 5.2.1 Software Requirements • PC with Windows Operating System (2000 or XP) • Scriptalk Station PC GUI Software 5.2.2 Hardware Requirements • PC with USB / COM port • Scriptalk Station USB enabled with Accessories Page 5 of 61 Confidential