Download ISO Test Report - Stellar

AS 3695, WHEELCHAIRS – STANDARD TEST FORM
Job Number: 490870
AS3695:1992, AS3696.1:1990 – DETERMINATION OF STATIC STABILITY , MARKING
AND LABELLING
Stability limits before
Stability
Test
action (if any) to
Specification
Reference in
limits
prevent sliding,
according to
clause of
clause of
Max./Min.
description of action
AS3695
AS3695
AS3696.1
Reference in
Max./Min
Stability facing up slope,
brakes on
Stability facing down slope,
brakes on
Stability facing up slope,
brakes off
Stability across slope,
brakes on
Stability in other critical
directions
>15°/0°
>15°/>15°
NA
Slides 12.2° /slides @
@ 8.5° without bars
>10°
6.1
7.1
>10°
6.1
7.1
>15°/0°
NA
>10°
6.1
7.2
>15°
NA
>10°
6.1
7.3
NA
NA
>10°
6.1
7.4
Performance Requirements (AS3695, Clauses 6.1, 8.1 (f), 8.1 (h))
The chair was tested with a carry bag loaded to the maximum stated weight if supplied
with the chair, or hooks or the like are provided
NA
The wheelchair shall be permanently marked
Yes
The wheelchair is permanently marked
Yes
“CAUTION – Limited stability wheelchair – Tips on a slope of less than 10°”
Remarks:
Artwork of permanent labelling was provided. End of remarks -----------
The sample submitted for this test satisfies the relevant requirements of
AS3696.1-1990 and AS3695-1992 (except the methods indicated in this
report as “not tested” and/or tested with deviations) for user mass 100 kg
NATA Accredited Laboratory No. 2953
NATA endorsed test report.
This document shall not be reproduced, except in full.
Yes
Page 3 of 12
Tester’s Initials: A.S.,B.S.