Download "user manual"

Transcript
Installation
2. Installation
To operate the Cinema Meter you need the latest XL2 firmware as well as the Spectral Limits and the Cinema Assistant
Options installed.
Update the firmware
Cinema Meter is supported by the XL2 firmware V2.40 and
higher. For the firmware update, register your analyzer at http://
my.nti-audio.com and proceed as instructed on the XL2 support page.
Install the options
Please use the license numbers printed on the license card
inside your purchased Cinema Meter Option. The license numbers are valid for activating the options on a single XL2.
Follow the installation procedure described on the license card
inside the Cinema Meter Option.
6
Example of a license card with sample numbers only.