Download ZG2 Users Manual

Connecting Peripheral and External Devices
Connecting a PC
Use the USB/RS-232C cable to connect the PC to the Controller.
Important
When connecting devices, refer to the Instruction Manual for the PC.
Connecting by a USB cable
Use the USB cable provided with the ZG2WDC1A Controller to connect the
Controller to the PC.
Important
Attach the ferrite cores (supplied) to both ends
of the USB cable.
Ferrite core
Note
Installation of the USB driver is necessary
only when connecting an external device to
the USB interface for the first time.
For the USB driver, use the exclusive USB
driver packaged with the ZG2-WDC1A
controller. Smart Monitor ZG2 is an
accessory of the ZG2-WDC1A.
152
Serial Communication
ZG2 User’s Manual