Download ZG2 Users Manual

Mounting the ZG2-WDS70
Fix by mounting screws making sure that the distance between the Sensor Head and
measurement target is matched.
Mounting method
Fasten the Sensor Head onto the mounting
base with M4 screws.
Tightening torque: 1.2 N·m
Important
For details on the positions of screw holes,
check
the
external
dimensions
in
“APPENDICES.”
External dimensions p.196
Mounting position
Mount the Sensor Head according to the following distances and angle.
210 mm
Emission axis
Reception axis
19°
Measurement target
Mounting for diffuse reflection
measurement
28
Mounting and Connecting Devices
ZG2 User’s Manual