1
Download L-INX User Manual
Transcript
L-INX/L-GATE User Manual Version 4.4 331 LOYTEC Power up all switches and devices. Wait until all devices are up, then test. Power-off Switch1. Wait approx. 10 seconds, then test. Power-on Switch2, power-off Switch1. Wait until Switch2 has booted, then test. Power-on Switch1. Wait until Switch1 has booted, then test. Reboot all L-INX and L-GATE devices. Wait until the devices have booted, then test. Remove a single Ethernet cable. Wait approx. 10 seconds, then test. This test should be repeated for different cables. LOYTEC electronics GmbH
