Download Sierra M6-2 User Manual

Teledyne LeCroy
Sierra Trainer Generation Commands
Default
Value
Setting
SATA Link Init Settings
OOB_SATA_D102_Time
100000
OOB_SATA_Align_Time
100000
Description
D10.2 time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit D10.2 symbols.
ALIGN(0) time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
SAS Speed Negotiation Settings
OOB_SAS_Align1_Time
81920
ALIGN(1) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(1) primitives.
OOB_SAS_Align0_Time
81920
ALIGN(0) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
OOB_SAS_Interspeed_Time 750000
Interspeed time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
keep the line at electric idle.
OOB_SpeedNeg_MTT.
29998080 The maximum time in OOBI during which training
OOBI
phase of speed negotiation should be completed in
Train‐SNW.
OOB_SpeedNeg_SNTT.
2200
The time in OOBI during which generator transmits
OOBI
phy capability bits in SNW‐3. In Automatic
connection This value is also used for the time during
which generator sends Align0 and Align1 in SNW1
and SNW2.
OOB_SpeedNeg_BCT.
2200
The time in OOBI during which generator transmits
OOBI
COMWAKE or D.C. idle during SNW‐3.
442 Sierra
M6‐2 SAS/SATA Protocol Analyzer User Manual