Download Gould Modbus J347 Interface

PREFACE
This manual describes
the installation
and use of
This interface
the 5347 MODBUSSlave Interface.
allows any model MODICON 184 or 384 PC to act as
a slave device on a MODBUScommunications
system.
The manual provides a description
of the
a review of capabilities,
J347 interface,
installation
procedures,
electrical
connections,
and troubleshooting
information.
In this manual "5347" refers
to the MODBUSSlave
The product designation
"J346"
Interface.
denotes a J347 interface,
a 5478 MODBUSmodem and
a cable, physically
separate but packaged
together.
Information
on the MODBUSIndustrial
Communications System may be found in the
following
documents:
.
MODBUSIndustrial
Communications
Product Description
.
MODBUSSystem Planning
.
MODBUSHost Software
System
Guide
Description
For information
on specific
(modems, interfaces,
etc.),
user manuals.
system components
see the appropriate
"The information
in this document is subject to
change without notice and should not be construed
as a commitment by Gould Inc.,
Modicon
Gould Modicon
Programmable Control Division.
assumes no responsibility
for any errors that may
No part of this
appear in this document.
document may be reproduced in any form without
the express written
permission of Gould Modicon."
MODBUSis a registered
1st
Edition,
trademark
June 1982
Copyright
1982, Gould Inc.
All Rights Reserved
of Gould Modicon.