Download Printer Protocol Interpreter DGL™

DGL SETUP Submenu
Format Attrib.
Affects the manner in which overlapping text and graphics are treated as the
label is printed.
•
XOR. Intersecting text strings, images, and barcodes print on top of one
another.
•
Transparent. Intersecting text strings, images, and bar codes will not be
printed. (An odd number of overlapping objects will print.)
•
Opaque. Intersecting text strings, images, and barcodes are obliterated
by those formatted last. Each character cell is treated as opaque.
The default is XOR.
Vert. DPI Adjust
NOTE: Applies to SL4M/T4M printers only.
This option fine adjusts the resolution used to scale the page elements/
coordinates. In cases where the printed label length is incorrect, the vertical
resolution value DGL uses for calculations can be fine adjusted by this menu
between -100 and +100. Negative values result in a lower DPI value and thus
a longer label. Positive values result in a higher DPI value, and thus a shorter
label. Note that this adjustment does not affect the size of images and
downloaded bitmap fonts.
•
0 (-100 to +100).
The default is 0.
Compatibility
This setting defines the emulation compatibility.
•
•
Standard. Datamax I-Series and W-Series compatible.
S-462. Avery S-462 compatible. The difference with standard is that
dimensions for barcodes and graphics lines are always in 1/100 inches,
independent of the selected Units of Measure (can be 1/100 inches or 1/
10 mm). The selected Units of Measure value is used for all other
parameters.
The default is Standard.
Command Ignore Menus
The Admin User menus allow ignoring of several configuration commands in
the host data. This allows using their corresponding front-panel settings,
without being overridden by host commands.
The default is to process all commands.
Length Cmd (STXc)
Allows the user to disable the Length Command.
Heat Cmd (H)
Allows the user to disable the Heat Command.
15