Download INSTRUCTION MANUAL

FOREWORD
SUPPLIED ACCESSORIES
Thank you for making the IC-7410 your radio of
choice. We hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and development went into the design of your IC-7410.
FEATURES
❍ High receiver performance: third-order intercept
point (IP3) of +30 dBm (HF bands only)
❍ Simple band scope function
❍ ±0.5 ppm of high frequency stability
❍ RTTY demodulator and decoder
❍ RS-BA1 compatible
The transceiver comes with the following accessories.
Qty.
qHand microphone ............................................ 1
wDC power cable*1 . ........................................... 1
eSpare fuse (ATC 5 A) ....................................... 1
rSpare fuse (ATC 30 A) ..................................... 2
tACC cable.......................................................... 1
y6.3 (d) mm plug.................................................. 1
uFerrite EMI filter*2. ............................................. 1
*1 D
iffers depending on the version.
*2 Not supplied with the non-European versions.
q
IMPORTANT
r
t
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the
y
transceiver.
For European versions
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating
instructions for the IC-7410.
EXPLICIT DEFINITIONS
w
w
u
(see p. 19 for installation details)
WORD
DEFINITION
RDANGER!
Personal death, serious injury or an
explosion may occur.
FCC INFORMATION
RWARNING!
Personal injury, fire hazard or electric
shock may occur.
• FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• C onnect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
NOTE
Equipment damage may occur.
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Spurious signals may be received near some frequencies.
These are made in the internal circuit and does not
indicate a transceiver malfunction.
Icom, Icom Inc. and the Icom logo are registered trademarks of
Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks
of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
i
e